BS IS0 2407:2024 Tracked Changes compares BS IS0 2407:2024 with BS IS0 2407:1997+A1:2016 BSl Standards Publication Test conditions for internal cylindrical grinding machines with horizontal spindle - Testing of accuracy bsi. TRACKED CHANGES IMPORTANT PLEASE NOTE This is a tracked changes copy and uses the following colour coding: Text example 1 - indicates added text (in green) Text example 2 indicates removed text (in red) - indicates added graphic figure or table indicates removed graphic figure or table About Tracked Changes This document is a PDF containing a Tracked Changes version of BS IS0 2407, which compares BS IS0 2407:2024 with BSIS02407:1997+A1:2016 The original version of BS IS0 2407:2024, appended at the end of this document, should be considered the version of record for this publication. PLEASENOTE This Track Changes document is designed to allow the user to identify the main changes to the standard since the previous version. It is not the official standard. Users are therefore advised to refer to the official version of record for implementation purposes. To ensure you have the latest version of record, please visit https:/ /knowledge.bsigroup.com @ The British Standards Institution 2024 Published by BSI Standards Limited 2024 ISBN9780539332346 0 Amendments/corrigenda issued since publication Date Text affected BS IS0 2407:2024 — Tracked Changes ForewordNational foreword This British Standard is the UK implementation of IS0 2407:1997+A1:2016Is0 2407:2024. It supersedes BS IS0 2407:1997+A1:2016,which is withdrawn. The start and finish of text introduced or altered by amendment is. indicated in the text by tags. Tags indicating changes to IsO text carry the number of the ISO amendment. For example, text altered by ISO amendment 1 is indicated by ( The UK participation in its preparation was entrusted byto Technical Committee MTE/1, Machine tools, to Subcommittee MTE/1/2, Machine tools - Accuracy. A list of organizations represented on this subeommitteecommittee can be obtained on request to its seeretarycommittee manager A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Contractual and legal considerations This publication has been prepared in good faith, however no representation, warranty, assurance or undertaking (express or implied) is or will be made, and no responsibility or liability is or will be accepted by BsI in relation to the adequacy, accuracy, completeness or reasonableness of this publication. All and any such responsibility and liability is expressly disclaimed to the full extent permitted by the law. This publication is provided as is, and is to be used at the recipient's own risk. The recipient is advised to consider seeking professional guidance with respect to its use of this publication. This publication is not intended to constitute a contract. Users are responsible for its correct application. The British Standards Institution 20162024 Published by BSI Standards Limited 20162024 7978 0 539 18183 8 ISBN 978-0 58090975 7 ICS25.080.50 Compliancewith a BritishStandardcannotconferimmunityfrom legal obligations. This British Standard, having been prepared under the direction of the Engineering Seetor Beard, was pubiished under the authority of the Standards BeardPolicy and eomes inte effeetStrategy Committee on 15 May 199831 August 2024.