BSEN IS0 4210-1:2023 BSl Standards Publication Cycles Safety requirements for bicycles Part 1: Vocabulary bsi. BSENIS0 4210-1:2023 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN IS0 4210-1:2023 It is identical to IS0 4210-1:2023. It supersedes BS EN IS0 4210-1:2014, which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee GME/25, Cycles. A list of organizations represented on this committee can be obtained on request to its committee manager. Contractual and legal considerations This publication has been prepared in good faith, however no representation, warranty, assurance or undertaking (express or implied) is or will be made, and no responsibility or liability is or will be liability is expressly disclaimed to the full extent permitted by the law. This publication is provided as is, and is to be used at the recipient's own risk. The recipient is advised to consider seeking professional guidance with respect to its use of this publication. This publication is not intended to constitute a contract. Users are responsible for its correct application. The British Standards Institution 2023 Published by BSI Standards Limited 2023 ISBN9780539043136 ICS 01.040.43; 43.150 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2023. Amendments/corrigenda issued since publication Date Textaffected BS EN IS0 4210-1:2023 EN IS0 4210-1 EUROPEAN STANDARD NORME EUROPEENNE EUROPAISCHE NORM January 2023 ICS 43.150 Supersedes EN IS0 4210-1:2014 English Version Cycles - Safety requirements for bicycles - Part 1: Vocabulary (IS0 4210-1:2023) Cycles - Exigences de sécurité pour les bicyclettes - Fahrrader - Sicherheitstechnische Anforderungen an Partie 1: Vocabulaire (IS0 4210-1:2023) Fahrrader-Teil 1:Begriffe (IS0 4210-1:2023) This European Standard was approved by CEN on 13 January 2023. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-datelists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkiyeand United Kingdom. cer EUROPEAN COMMITTEEFOR STANDARDIZATION COMITEEUROPEENDENORMALISATION EUROPAISCHESKOMITEEFURNORMUNG CEN-CENELECManagementCentre:RuedelaScience23,B-1040Brussels All rights of exploitation in any form and by any means reserved 2023CEN Ref. No. EN IS0 4210-1:2023 E worldwide for CEN national Members.