International ISO Standard IS05942 First edition Bamboo-wood composite for container flooring 2024-08 Reference number ISO 5942:2024(en) @ ISO 2024 IS0 5942:2024(en) COPYRIGHT PROTECTED DOCUMENT @IS02024 All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may the internet or an intranet, withoutpriorwrittenpermission.Permission canberequested from either Iso at the address below or ISo's member body in the country of the requester. ISO copyright office CP 40i : Ch. de Blandonnet 8 CH-1214 Vernier, Geneva Phone: +41 22 749 01 11 Email: [email protected] Website: www.iso.org Published in Switzerland @ IS0 2024 - All rights reserved ii IS0 5942:2024(en) Contents Page Foreword. .V Scope 1 ..1 2 Normative references .1 3 Terms and definitions. .1 4 Classification .2 5 Technical requirements. .2 5.1 ..2 Specifications. 5.1.1 Size and tolerance. .2 5.1.2 Diagonal difference 5.1.3 Edge straightness ..2 5.1.4 Degree of warping. 5.2 Appearance quality .3 5.3 Physical and mechanical properties ..6 5.4 Floor strength. .7 5.5 Anti-insect and antiseptic treatments. ..7 Inspection methods .7 6 .7 6.1 Size specification 6.2 1 Diagonal difference 6.3 Edge straightness. 6.4 Degree of warping .7 6.5 Appearance quality Physical and mechanical properties 6.6 ..8 ..8 6.6.1 Specimenpreparation 6.6.2 Standard conditioning ..8 6.6.3 Density .8 6.6.4 Moisture content ..9 6.6.5 Bond durability. .9 6.6.6 Short span bending force 6.6.7 Concentrated load .9 Floor strength. 6.6.8 ..11 Inspection rules .11 7 7.1 Inspection category .11 7.1.1 General ..11 7.1.2 Delivery inspection. .11 7.1.3 Type inspection .11 7.1.4 Floor strength inspection .12 7.2 Group principle. 12 7.3 Sampling methods ..12 7.3.1 .12 General 7.3.2 Appearance quality inspection .12 7.3.3 Specifications inspection .12 7.3.4 Physical and mechanical properties inspection 13 7.4 Comprehensive judgement.. .13 7.4.1 Determination of test results. .13 7.4.2 Comprehensive judgement. .13 ..14 8 Marking, packaging, transportation and storage 8.1 .14 Marking 8.1.1 Product marking. .14 8.1.2 Packaging label. ..14 8.2 Packaging. ..14 ..14 8.3 Transportation and storage Annex A (informative) Details for reference of the simulated freight container base underframe....15 @ IS0 2024 - All rights reserved ili